CAD/CAM ST White Zirconia Blank
CAD CAM zirconia blank is made of absolute bio-compatibility medical dentistry-grade zirconia powder. With the technology of isostatically cold pressing together with high compressive strength, the zirconia blank finally features outstanding bending strength and aesthetic translucency.
The zirconia blanks can be used to create crowns, bridges, inlays, and veneers of fixed partial dentures.
Compatibility
White zirconia blanks that are compatible with the dentistry CAD/CAM open system (diameter 98 mm with step), Amann girrbach, and zirkonzahn. The white blanks’ height ranges from 10 mm to 25 mm.
| Open System | Amann Girrbach System | Zirkon zahn System |
| 98x10mm | 89x71x10mm | 95x10mm |
| 98x12mm | 89x71x12mm | 95x12mm |
| 98x14mm | 89x71x14mm | 95x14mm |
| 98x16mm | 89x71x16mm | 95x16mm |
| 98x18mm | 89x71x18mm | 95x18mm |
| 98x20mm | 89x71x20mm | 95x20mm |
| 98x22mm | 89x71x22mm | 95x22mm |
| 98x25mm | 89x71x25mm | 95x25mm |
Technical
- Flexural strength:1000Mpa
- Translucency:43%
- Dentistry CAD/CAM Milling system compatibility:98 mm open system, Amann Girrbach, Zirkon Zahn
- Thickness:10 mm-25 mm
- Indications:full arch, crown, and bridge, veneer, implant, etc
- Crystallization maximum temperature：1530℃
Zirconia sintering chart
