Universal Denture Injection System 2 in 1 Complete Design
The Pneumatic Denture Injection System is an advanced engineering solution optimized for high-precision injection molding denture workflows within modern dental laboratories.
Featuring a highly versatile, automatic, and flexible design, this system effortlessly unifies both flexible thermoplastic cartridge processing and traditional hot-cured acrylic setups.
By utilizing consistent pneumatic compressed air power, it removes the manual labor of hand-cranking to achieve flawless, high-density prosthetic adaptation in seconds.
Features
Dual-Workflow Versatility: Accommodates both flexible thermoplastic cartridges (like nylon or Valplast) and traditional hot-cured or self-cured acrylic PMMA dentures.
Stable Twin-Bracket Mounting: Mounts the heating cylinder securely onto the dual-frame brackets to ensure rock-solid stability during high-pressure pneumatic injections.
Isolated Modular Control: Separates the heating cylinder from the digital control station via a quick-connect cable, protecting sensitive electronics from heat damage while improving benchtop flexibility.
Pneumatic Injection Power: Uses standardized compressed air lines for a uniform, high-pressure mold fill.
Smart Heating Station: Independent digital control unit ensures highly precise thermal regulation.
Technical Parameters
| Parameter | Specifications |
| Voltage | AC 110V/220V / 50Hz ±10% |
| Power | 400W |
| Heating Temperature | 282°C – 288°C |
| Pressure Time | 7m 30s – 11m |
| Air Supply Required | 0.4 Mpa |
| Net Weight | 33 kg |
| Shipping Weight | 36 kg |
| Included Accessories | 50 pcs plastic bags for pouring hot-cured PMMA acrylic dough |
Hot-cured Acrylic PMMA Complete Denture Operation Tutorial Reference:
1, Proportion and Pour: Measure the hot-cured PMMA acrylic powder and liquid at the correct mixing ratio and pour them into the plastic bag.
2, Mix to Dough Stage: Knead the materials thoroughly inside the sealed bag until the mixture reaches a uniform dough consistency.
3, Load the Press Tube: Transfer the prepared acrylic dough smoothly into the injection material press tube.
4, Lock and Inject: Secure the material tube tightly to the flask using the Luer-lock connection and initiate the pneumatic injection.
Reviews
There are no reviews yet.